Merrill Iron & Steel, Inc.

Production Facility
Company Profile
Project Gallery
Services
Employment
Our Facility
Contact Us
FTP Site
Home Site Map Search
Aerial View of 46 Acre Site

Schofield Plant
355,000 sq. ft.

Fabrication Plant

PRODUCTION FACILITY - 46 ACRE SITE
355,000 Sq. Ft. Production - 60,000 Sq. Ft. Corporate Office
Detail & Prep    35,000
Fabrication & Welding     105,000
Blasting     10,000
Paint & Shipping    80,000
Raw Material Storage    30,000
Plant Offices & Production Expansion Capacity    95,000
bullet

Finished materials are typically pre-loaded on 10” tall load transfer carts or occasionally on trailers in one of four load out bays. Pre-assembled loads are then transferred outdoors and either staged in our completely lighted 10 acre pre load storage yard with our combination 25 ton travel lift load lifting device, or directly loaded onto semi trailers for shipment.

bullet

Raw materials received by truck or rail. Unloading with our travel lift or large fork lift. Storage outdoors in one of our 15 acre, completely lighted, raw material storage yard.

bullet

MIS has approximately 80,000 square feet of Sophisticated Paint area. 

PRODUCTION EQUIPMENT
Qty   Equipment   Capacity
1   Barringer Horizontal Band Saw   18” x 48”
1   Kalenbach Cold Saw   18” x 40”
2   Marvel Vertical Band Saw (Model 25 )   24” x 28”
3   Marvel Vertical Band Saw (Model 81A)    18” x 21”
1   CNC Peddinghaus 3-Spindle Drill Line   W6 -W40’s
1   CNC Whitney 5-Press Beam Line   W4 -W36’s
1   CNC Fabraline 3-Press Beam Line    W4 -W36’s
1   CNC Whitney Angle Line   6” x 6” x 1/2”
1   CNC M-G Burning Table   12' 6" x 42’
1   CNC Franklin w200 ton/400 amp Plasma Plate Punch   6’ x 40’ x 1 1/2”
1   CNC Controlled Automation Plate Punch   175 Ton
1   Hill-Acme Single End Punch   75 Ton
1   Cincinnati Plate Shear   1/2” x 12’
1   Steelweld Press Brake    750 Ton x 24’
1   Pope Initial Pinch Plate Roll   1 3/4” x 12’ / 4” x 4’
1   Beam Cambering    W36 x 300
1   Buffalo Angle Roll   3” x 3” x 3/8”
1   2-Torch WT Splitter   80’
2   Radial Arm Drill Presses   6’ Arms
1   Set Randsom Powered Turning Rolls   20 Ton
2   Sets Randsom Powered Turning Rolls   10 Ton
1   Weld Positioner   10 Ton
1   3-Axis Seam Welder 1500 amp   16’ x 20’ x 60’
55   600 AMP Welding Machines w/270 degrees x 30’ Double Hinge Booms
1   1800 AMP Stud Welders
1   8-Wheel Wheelabratorฎ   5' 6" x 8’ 5" Window
1   12-Wheel Wheelabratorฎ   6’ 6" x 12’ 6" Window
10   Grayco King & Bulldog Spray Pumps
2   Grayco Plural Component Epoxy Spray Pumps w/Computerize Controls
Qty   Cranes
10   20 Ton
4   10 Ton
10   5 Ton
38   3 Ton
2   2 Ton

Leasing Opportunities | Corporate Office | Production Facility